Tanning bed lamps are the lamps used in every kind of tanning bed. When looking to purchase either a new or used tanning bed, it is important to look at the lamps. Some things to consider when are that the lamps used by the old tanning beds don’t work as well. They didn’t use lamps like the ones they have now, so they don’t give the same tanning results as the new ones.
If the old beds didn’t use lamps, the new lamps will work better, but don’t expect the same level of tanning results. Also, when changing lamps, it is NOT recommended to use the same color sort that you use on the bed. Your color sort is made different than the tanning bed bulbs, and you will get a different tanning result on each one.
Who uses tanning beds?
Everywhere you go, everyone is different, but you can figure out about the people who are in the tanning bed by looking at where they are from. It is simpler to figure out the types of lamps they are using. The types of lamps are:
– 100-watt lamps- 160-watt lamps- 60-watt lamps- 40-watt lamps- 16-watt lamps
The 100-watt and 160-watt bulbs are the most commonly used. They are a good idea to replace all of the 100-watt bulbs with the 160-watt ones when you are done with the tanning bed. This will stop you from getting a tan that is uneven.
Try to replace the bulbs when they are about halfway gone. Keep in mind that tanning bed bulbs last about 50-200 hours. You can easily determine how long that is by looking at the label on the bottom of the bulb.
The remaining batteries will last about 30-40 hours. You will want to check the expected life on the batteries by inserting the batteries into the tanning bed and looking at the label. If the label says that the battery “exists”, it means that the tanning bed bulb “exists”. Discount tanning bed bulbs will last about 25 hours, but NOT on the bed itself. Be sure to replace the tanning bed bulb when the expected life has passed.
Different brands of tanning bed bulbs can vary from as low as $2.99 to almost $100. You can usually buy them by the sidewise.
Once you replace your tanning bed bulbs, you may need to adjust the bed’s temperature to meet the needs of your body. There are two ways that the bed’s temperature can be adjusted. One is by using an oxygen concentrator. The other way is by adding an add-on control device to the bed.
There are two main types of oxygen concentrator:
– checked ballasts- foils
Check the conditions of the oxygen concentrator in your tanning bed before you start tanning. It is possible to get a bad O2 concentration if the bottle that contains the oxygen concentration is not able to operate correctly.
Some tanning beds have safety valves that will shut the iron if it senses that the concentration of oxygen is too high. If the concentration of oxidants is too high, the iron will turn off. Don’t rely on this technology if the iron is not turned off!
Prevent skin damage by preventing the iron from touching your skin when you tan. Tanned skin is more vulnerable to the harsh rays of the iron. Before you start tanning, protect your skin by applying a layer of good quality sunscreen.
A common deterrent to using a tanning bed is the odor. Many people cannot withstand the smell of a gym-othrowing smell. For them, an iron with a romantic chrome-plated iron is the ideal. There are many brands of such irons available.
There are many benefits of using a tanning bed. You can limit your time in the sun, or better, prevent it altogether. If you do use a tanning bed, you need to be aware of the danger of skin cancer and you must take precautions to reduce your UV exposure.
Before you start tanning, you should consider the strength of the iron. If the iron is too weak, it will not be able to reach the melanin in your skin. So, if you don’t want to burn, you must make sure that the iron you’re using has a adjustable temperature setting. And that temperature setting should be set to a value that is comfortable for you to hold for long periods of time.
